 Universal Manual
(PDF - 2.55MB)
Training Video
Remittance Kit
Loading #10 Envelopes
Portrait
Loading #10 Envelopes
Landscape
Loading Large Envelopes
Set-up on a Heidelberg
QM46 or PM46
Set-Up on a Heidelberg
SM52 or DI ProUniversal Feeder Training & Support by Suspension FeederReceiving your new feeder:
Uncrate the feeder by removing the cardboard surrounding the machine and removing the packing material. Then cut the metal bands holding the machine to the crate. Carefully remove the feeder from the skid by lifting on the stand. DO NOT LIFT THE TOP FEEDER ASSEMBLY. Inspect the feeder for damage during shipment. Most freight damage must be noted immediately upon receipt and claims must be submitted soon after delivery.
The power receptacle should be near the feeder; easily accessible and properly grounded.The feeder and delivery conveyor must be plugged into a properly grounded 120V outlet.
(International feeders come with a thermally protected transformer) The total amperage draw for the feeder and the conveyor is less than 5 amps. Surge protection is strongly recommended. How it works:
The Universal Envelope Feeder adapts to virtually all small offset presses without electrical or mechanical connections to the press. Envelopes are fanned and loaded onto the conveyor of the feeder. The conveyor advances the stock towards the press and forms a stack 3/4" to 1" (20mm-25mm) high beneath the sucker feet of the press.
An automatic jogger maintains a square stack and holds the stock in the proper position. The sucker feet pick up the envelopes from the stack and feed them into the press. The photo eye monitors the height of the stack and operates the conveyor as needed to keep a consistent height stack at the front of the press. The feeder can accommodate most business size envelopes from A2's through 10 x 13's. The feeder automatically adjusts itself to all printing speeds. It was designed for run lengths of 1,000 pieces and above. A delivery conveyor collects the envelopes after printing so they can be conveniently reboxed. | Specifications: | | | Envelope Feeder- Width: 15 ½” (393mm) max.
- Length: 47” (1194mm) to 60” (1152mm)
- Height: 36” (914mm) to 43” (1092mm)
- Weight: 137 lbs. (61.6kg)
- Power: AC 120 Volts, 1 Ampere, 50-60 Hertz
| Conveyor- Width: 12” (309mm)
- Length: 36” (914mm) or 60” (1524mm)
- Height: 19” (482mm) to 27” (686mm)
- Weight: 48 lbs. (21.6kg)
- Power: AC 120 Volts, 1 Ampere, 50-60 Hertz
|
Space requirements:
Approximately 4’ (1.25m) in front and behind the press. | Sizes | Minimum: 3 5/8” x 4 1/8” (92mm x 105mm)
Maximum: 10” x 13” (254mm x 330mm) |
| 
Printable Page